RC Factory USA - Twisted Hobbys RS-352 / Sbach flown by Daniel Dominguez from Aerofundan on Vimeo.
The new RS352 is a hot new release from RC Factory. Enthusiasts will spot that the design draws heavily from the full size unlimited aerobatic machine the Xtremeair Sbach from Germany. As with all RCF designs the model is of similar dimensions to the other semi scale aerobatic designs in the range but without the customary round cowling. The RC Factory RS352 design features the larger control surfaces of the Yak 55 and SU29 with the more streamlined fuselage similar to the Flash. In fact you could consider it a hybrid mixing both the strong flying characteristic of each design. Powered with our recommended light weight but extremely powerful set-up you are assured incredible performance that will enhance your flying experience. RC Factory designs are virtually limitless in their ability and are often favoured by the serious hardcore 3D flyers looking for one of the best tools available to craft their artistry.
Serious tools don’t have to look just functional! The RS352 adds a new dimension to RC Factory manufacturing with printed surfaces on both top and bottom of the wing and the tailplane. This is a nice touch with the understated underside providing an excellent contrast to the top surface. The upper edge of the fuselage and canopy that was traditionally a straight cut edge on older RCF designs also features a new bevelled edge for a smoother more finished appearance. The RS352 is constructed almost entirely of tough EPP foam that bends not breaks and is reinforced where necessary with carbon rod and strip. The model assembles rapidly utilising interlocking parts and pre cut slots. Small hardware, lightweight Kevlar pull-pull, grp components and a tough but light carbon undercarriage are also included. We know our products very well and would admit that the RS352 has the ‘Flash’ style grp motor bulkhead that has not been so well received due to its propensity to detach. Don’t worry – we can inform you about a very simple, tidy and light weight method to secure the bulkhead so it’s never a worry. Contact us for details.
The RS352 power requirements are similar to the YAK and SU29 so anywhere from 100W to 200W will fly the model. Our recommended ‘Classic’ power set just tops the 200W with a high discharge pack and is extremely popular and highly recommended by everyone who uses it. The RS352 has been designed for 9-12g micro servos but we would recommend using high torque versions when powered at the upper limits. Please consider metal geared servos on the tail surfaces if you intend to use the model to the absolute maximum. Plastic geared servos no matter how good quality will not tolerate the abuse these models can sustain and there’s nothing worse than having to dig out servos from the foam for replacement. As far as Li-Po batteries are concerned we would say keep it light with any thing from 600 – 1350mAh 3S. The best performance is achieved with high discharge Li-Po’s in the 800-1000mAh capacity range but additional pack weight can be useful in those less than ideal flying conditions where the weight adds some increased stability to the airframe. There are some hefty pack recommendations advised by other retailers and we advise to avoid these unless you want a truly average performer with reduced ability. We build and fly these models for ourselves and only recommend what we consider to be optimal.
The RC Factory RS352 EPP features:
Full EPP construction
Builds in 1 to 2 evenings
Composite landing gear
Extra large control surfaces
Incredible control authority
Smooth pattern performance
Ideal 3D trainer
Almost indestructible
Repairs easily with CA
Czech product
Recommended radio equipment:
A minimum of a 4 channel radio with micro receiver
4x servos 9 - 12g (please use high torque servos)
Recommended power systems:
Brushless motor: 100-200W
Speed controller: 10 - 30A speed controller
Li-PO battery: 650 - 1350 mAh 3S 11.1V
Specifications:
Wingspan: 1000 mm
Length: 1000mm
Flying Weight: 400 - 460 g
To all other retailers who cannot be bothered to create, or pay for the services of a copy writer I would like to remind them that the sales information above is original copy. Any commercial user duplicating this material is infringing copyright. © ParkAero 08/04/11.
